Showing all 10 results

Al’s Liner 2 Gallon DIY Kits

$225.00

Kit Contents (Per Gallon):

  • 70 oz. Component A
  • 28 oz. Component B
  • 28 oz. Component C
  • 6 oz. Primer & Sprayer
  • 4 oz. Color (Black, Grey or Tan)
  • Mixing Paddle

Specs

  • Tensile Strength – 2,300 psi pounds
  • Tear, Die C – 351.7 psi
  • Elongation – 453%
  • Tear, Split – 100 psi
  • Hardness(Shore A) – 88

Al’s Liner Spray Guns

$73.11

Al’s Liner Air Texture Gun has a special 5-point spray texture nozzle which enables the applicator to achieve different textures and finishes.

Contents:

  • Air Texture Gun
  • 1.25 Gallon Hopper
  • 3 Texture Orifices
  • 5-Point Texture Nozzle

Specs

  • 5-Point Texture Nozzle
  • 3 Different Texture Orifices
  • Adjustable Trigger
  • Comfort Grip Handle
  • 1.25 Gallon Hopper

Al’s Liner Rubber Crumb

$13.99

Product Highlights

  • Non-Skid additive
  • Stretches material square footage
  • Non-Abrasive to skin and contact
  • Great for flooring or for users looking for aggressive textures
  • Another GREEN effort (Made from recycled tires!)

Al’s Liner Heat and Noise Reducer

$57.72

Al’s Liner Heat and Noise Reducer provides incredible insulation, heat reflection and sound deadening properties.

Al’s Liner HNR

  • Can be applied with Al’s Liner Spray Gun or Brush and Roller Kit
  • Reduces Heat (Heat Reflection)
  • Excellent Sound Deadening Properties
  • One Gallon Container

Specs

  • Temperatures up to 500°F
  • Reflects exterior temperatures by 45°F or more
  • Recommended Application Thickness – 31 mil
  • Coverage @ 31 mils – 44 sq/ft per gallon
  • Dry Time – 1 Hour @ 70°F (Allow up to 24 hours for full dry time)

Al’s Liner LMR (Lecithin Mold Release)

$15.39

The rapid dry, anti-stick formula is suitable for cold and hot molds. Al’s LMR prevents sticking which increases the life of dies and molds, improves product surface finishes, and reduces production times. Al’s Liner LMR is biodegradable, colorless, and odorless.

Product Highlights

  • Non-Stick
  • For Hot or Cold Molds
  • Vegetable Based
  • Biodegradable

Al’s Liner Roller/Brush Kit

$15.86

Normal application with the Roller/Brush kit provides a standard orange peel texture commonly seen in roll-on bed liners. The Al’s Liner Roller/Brush Kit can also be used with Al’s Rubber Crumb.

Product Highlights

  • 1-3″ Brush
  • 2-4″ Shed Resistant Roller Pads and Application Arm
  • 1 Paint Tray
  • Apply at any thickness, just requires multiple coats.

Al’s Liner DIY Window Tint

$9.00$10.00

We offer three colours/Volatile Light Transmission (VLT) 5% aka “limo tint”, 20%, and 35% aka “factory tint”

  • Weather Resistant Polyesters for a more durable and fade resistant film.
  • High Quality Dye Structures Dyes with UV stabilizers applied to the polyester and adhesive for additional UV protection and fading resistance.
  • Scratch resistant coating on the interior portion of the film to prevent damage and scratches.
  • Sure Grip Adhesive to prevent blistering over time.
  • True Black not a blue hue due to lesser quality dyes and polyesters.

This combination may not meet regulations in your area. It is your responsability to check.

Al’s Liner Squeegee and Knife Kit

$8.38

Al’s offers a knife and squeegee kit to assist with you window tint installation. It is crucial to have the proper tools for installation; a quality sharp knife is a must for cleanly cut edges and the squeegee or hard card with sharp corners for removing air and water bubbles but also tucking the film into gaskets and corners.